Ubuntu desktop setup steps
Ubuntu 10.10 desktop setup steps for an AMD64 system. Most of these instructions will also work on 8.04 LTS, 8.10, 9.04, and 9.10, and 10.04 LTS these instructions were previously for those versions, and it should almost all work on an x86 system too:
- 1 Pre-installation standard hardware test procedure
- 2 Installation
- 3 Tweaks and Preferences
- 4 Firefox configuration steps
- 5 Firefox Add-ons
- 6 Firefox Tweaks
- 7 Installation of extra software
- 8 Configure "Microsoft Natural Ergonomic 4000 Keyboard"
- 9 Custom Key Bindings, aimed at "Microsoft Natural Ergonomic 4000 Keyboard"
- 10 Install Skype
- 11 Install the Tahoma fonts
- 12 Install Flash
- 13 Install Google Earth
- 14 Install Acrobat reader
- 15 Install Opera
- 16 Enable Apport for crash bug reporting
- 17 Configure Open Office to work in MS Office 2000 compatibility mode
- 18 Set up Australian dictionaries in Open Office
- 19 Evolution configuration
- 20 Set up SSH keys and KeepAlive Interval
- 21 Automounting remote file systems using SSHFS
- 22 right before and right after each upgrade
- 23 Ubuntu 9.04 tweaks
- 24 Ubuntu 9.10 tweaks
- 25 Ubuntu 10.04 tweaks
- 26 Ubuntu 10.10 tweaks
- 27 Ubuntu 11.04 tweaks
- 28 Ubuntu 11.10 tweaks
- 29 Install Chromium dev builds
- 30 Python-iview (for Australia only)
- 31 VirtualBox
- 32 Newsgroup bin client
- 33 Steps for making the Benq Acer S2W 3300U work
- 34 Dropbox
- 35 Handbrake
Pre-installation standard hardware test procedure
Before installing or configuring any software, it is imperative to test the hardware beforehand, to establish that it is not provably broken:
- Download the ISOs for System Rescue CD and Ultimate Boot CD and burn these.
- From either CD, run Memtest86+ on the machine overnight, to test that the CPU and memory are error-free.
- From UBCD, run a CPU stress test for 5 to 10 minutes to check CPU is reliable and adequately cooled.
- From Sys Rescue CD, check for bad blocks on the hard drive, before trusting it with any data:
badblocks -v -s -w -c 4096 /dev/sda
Note however that badblocks is quite a slow test - e.g. took 34 hours on a 500 GB SATA disk in an external USB enclosure, and 17 hours on a 250 GB IDE disk.
It's also a destructive write test, and so will blank the disk, so make sure you have the right device (use
fdisk -luto confirm the device's size and name).
Successful output will look something like this:
Checking for bad blocks in read-write mode From block 0 to 244198583 Testing with pattern 0xaa: done Reading and comparing: done Testing with pattern 0x55: done Reading and comparing: done Testing with pattern 0xff: done Reading and comparing: done Testing with pattern 0x00: done Reading and comparing: done Pass completed, 0 bad blocks found.
If problems are found with any of the above, resolve these first before proceeding further.
- Firstly, decide whether you want software RAID or not. Personally, I use RAID-1 mirroring of a single bootable partition, using 2 same-sized disks, from 2 different manufacturers, because:
- it's simple.
- it's redundant enough.
- it's cheap: the incremental cost is the cost of a single disk, which is less than $100.
- you can boot off of it.
- it's not a question of if a disk will fail, but when.
- For software RAID, install from the Alternate Installation CD. You can always convert to RAID-1 later, but it's significantly more faffing about than setting it up this way from the get-go.
- Once you've done the above, download and burn either the standard or alternate Ubuntu install CD, as appropriate.
- Insert installation CD. Follow simple options, installs, ejects CD, reboots. Then login.
- System -> Networking -> set up static IP address instead of dynamic IP address.
- reboot to get network changes to apply (theoretically this should not be necessary, but in practice it was, at least for me on 8.04).
- reboot, install system updates. Then reboot once updates are installed.
- system -> hardware drivers -> enable the proprietary nvidia drivers.
- reboot to enable the proprietary drivers.
Tweaks and Preferences
- Ditch the annoying sounds: System -> Preferences -> sound -> sounds -> set all to "no sound", and untick "play system sounds", and on "system beep" tab untick all boxes.
- Ditch the thrashing hard-disk: System -> Preferences -> Searching and indexing -> General -> tick "enable indexing" and "enable watching" and both of the power management boxes to disable stuff when on battery.
- To get Subpixel Smoothing on LCDs, do this: System -> Preferences -> Appearance -> Fonts -> Select "subpixel smoothing (LCDs)". Need to restart Firefox for this change to take effect in Firefox.
- To get reasonable desktop visual effects: System -> Preferences -> Appearance -> Visual Effects -> Select "Normal".
- To make the system remember running apps and window locations on logout, do this: System -> Preferences -> sessions -> session options -> tick "automatically remember running applications when logging out". In Ubuntu 9.04 / gnome 2.26 & up, this setting has moved, and is now under: System -> Preferences -> Startup Application Preferences -> options -> tick "automatically remember running applications when logging out".
- Power saving: Turn off blinking cursor by going: System -> Preferences -> Keyboard -> untick "Cursor blinks in text fields".
- Add terminal icon to gnome panel: Right-click panel -> Add to Panel -> Application Launcher... -> Accessories -> Terminal -> Add -> Close.
- Gedit -> Edit -> Preferences -> "Editor" tab -> tick "autosave" files every 2 minutes.
- Gedit -> Edit -> Preferences -> "Plugins" tab -> tick "Sort" to enable the sort plugin -> Close. Can now highlight text and go Edit -> Sort to get it alphabetically sorted.
Firefox configuration steps
Go Tools -> Add-ons -> Get Add-ons -> then search for and install these add-ons:
cd /usr/lib/keepass2/ sudo mv KeePassRPC.plgx KeePassRPC.plgx.old-`date` Open https://github.com/kee-org/keepassrpc/releases/latest , replace the link below with whatever is latest KeePassRPC.plgx version: sudo wget https://github.com/kee-org/keepassrpc/releases/download/v1.8.0/KeePassRPC.plgx Close Firefox, close KeePass (note: MUST restart keepass as it compiles the add-on modules on restart), restart Firefox.
Note: if you then get an error on starting keepass that says "the plugin cannot be loaded a new Keepass version is required to open this file", then you need to update Keepass. The ones included with the distro can be out of date (e.g. 2.32 when 2.35 is available). For example, to update Ubuntu or Mint, use this PPA with the current version:
sudo add-apt-repository ppa:jtaylor/keepass sudo apt-get update sudo apt-get upgrade
- Don't want Firefox to close when pressing ctrl-w on the last tab: Tools -> tab mix plus options -> events -> tab closing -> tick "do not close window when closing last tab by hotkey".
- Tab mix plus -> Events -> New Tabs -> Tick "Open new tabs next to current one".
- Tab mix plus -> Events -> Tab Features -> Untick "Ctrl-Tab navigates tabs in most recently used order".
- Tab mix plus -> Display -> Tab Bar -> When tabs don't fit width: Multi-row; Set number of rows to 2 or 3.
- Stop animated GIFs in Firefox: about:config -> image.animation_mode -> change to "none"
- Firefox: Fix the stupid behavior of overwriting current tabs when opening new tabs: about:config -> browser.tabs.loadFolderAndReplace -> toggle to "true". [Have to re-apply this setting when upgrading Linux distro]
- To get autocomplete for the web address, go: about:config -> browser.urlbar.autoFill -> toggle to "true" -> restart FF.
- Stop the full screen mode-switch animation: about:config -> browser.fullscreen.animateUp -> change to "0".
- Perform a sync using Foxmarks wizard, and for the initial setup keep the bookmarks on the server, and overwrite those on this computer.
- File -> Page setup ... -> Paper size = "A4", and orientation = "Portrait".
- Edit -> Preferences -> Main tab -> tick to close the download window when all downloads are finished.
- Laptops only: Add a delay to the bookmark menu collapsing (only really useful on laptops when navigating with a trackpad or button, which tends to be fairly inaccurate) - about:config -> right-click -> New -> Integer -> name is: ui.submenuDelay -> value is: 800
- Make the "Backspace" key be like pressing the "Back" button: about:config -> browser.backspace_action -> change to "0".
- Stop blocky graphics: View -> Zoom -> Tick "Zoom Text Only".
- About:config -> dom.max_script_run_time -> chnage from 10 to 20 to increase timeout on slow scripts.
- Set search bar to use Australian Google rather than US Google: Open this list of search plugins -> click "Google Australia - the web" -> tick the "Start using it straight away" box -> click "Ok".
- To make streetview work: Tools -> Addons -> Flash-block -> preferences -> whitelist -> add "maps.google.com.au" and "maps.google.com".
- Firefox 4, to limit excessive memory usage: about:config -> browser.sessionhistory.max_total_viewers -> set to "0".
- To stop old tabs using memory when the browser is restarted: Edit -> Preferences -> Tabs -> tick "Don't load tabs until selected". * If install noscript, then add a whitelisting for xmarks.com
- To increase mouse scroll speeed: About:config -> mousewheel.withnokey.sysnumlines -> toggle to false. Then make sure that mousewheel.withnokey.numlines is set to 6.
Installation of extra software
Go system -> admin -> synaptic package manager -> then Install the following (my brief descriptions of what some packages do are also shown) :
- inkscape # Vector drawing package
- hugin # Create panoramas from an image set.
- dia # Draw diagrams & flow charts, somewhat like "visio" on Windows.
- xchat # IRC client.
- ttf-mscorefonts-installer ttf-linux-libertine ttf-inconsolata # The most useful font sets. See also the "Install the Tahoma fonts" section below.
- audacious # Like XMMS or Winamp
- nmap # Check for open ports.
- filezilla # GUI FTP client.
- wireshark # Packet sniffer
- powertop iotop htop # Show power hogs, I/O hogs, and an more visual command-line version of top.
- nautilus-open-terminal # adds ability to right click on a folder and get a command prompt there.
- php5-cli php5-gd php5-curl # Only useful if you want to write scripts in PHP.
- traceroute # How packets get from here to there over the network.
- curl # Command line HTTP client, includes form-submitting capacity
- tofrodos # Convert line endings from dos to UNIX or vice-versa.
- libxml2-dev libmysqlclient-dev # Optional: Only used for compiling PHP snapshots
- eclipse sun-java6-jdk sun-java6-jre sun-java6-plugin libmysql-java junit junit-doc # Optional: Java development using Eclipse + java plugins for Firefox
- sysinfo # Kind of like device manager on Windows. Shows CPU / memory / hard disk installed, some hardware that has been detected, etc.
- autofs smbfs smbclient
- gtk-recordmydesktop # Record videos of what you're doing on your desktop.
- gworldclock # Want to simultaneously see the time in Tokyo, LA, London, and Rio? Use this.
- ffmpeg2theora # Convert videos into format suitable for uploading to Wikimedia commons.
- rar p7zip-full # needed for extracting .7z and RAR archives
- gnome-do # Run apps or commands from a keyboard launcher.
- pinfo # Much nicer UI than man or info for reading documentation.
- vlc mozilla-plugin-vlc
- avidemux # Useful for replacing audio tracks in video files.
- indent # Useful for auto-indenting code.
- smartmontools smart-notifier # S.M.A.R.T. hard disk monitoring tools.
- ddrescue # Useful for recovering data from failing hard disks.
- gimp-resynthesizer # A nifty plugin for gimp for repairing images or filling in content intelligently. Ignore if you don't use gimp.
- qpdf # Useful for removing password from PDF files, as per this guide.
- hardinfo # Generates a hardware report and benchmark for the system; can also run in command line mode by doing:
hardinfo -r -f html > report.html
- gtkvncviewer # Nice VNC client.
- renameutils # Useful for bulk renaming of files. Example for renaming all .JPG files in a directory to .jpg (lowercase) is:
rename s/JPG$/jpg/ *
- meld # Good GUI for comparing two files, e.g. two log files.
- asciio # Good for drawing ASCII graphs; only available in Ubuntu 10.10 and up.
- spamassassin # Email filtering, used by Evolution.
Configure "Microsoft Natural Ergonomic 4000 Keyboard"
To get the back / forward keyboard keys working in Firefox, when using the "Microsoft Natural Ergonomic 4000 Keyboard", go System -> Preferences -> Keyboard -> Layout -> click the model button -> Choose Microsoft -> set model to "Microsoft Natural Keyboard Pro USB" -> click "close".
Custom Key Bindings, aimed at "Microsoft Natural Ergonomic 4000 Keyboard"
Note: the steps keep changing in each Ubuntu release (the menus move around, the keycodes change), unfortunately. This is what works for me using 11.10 in gnome-fallback mode:
- ubuntu "System Setting" (top right corner of your desktop) -> Keyboard -> Shortcut.
- Set "1" favourite key to "run a terminal"
- Set "2" favourite key to "open home folder"
There seems to be a bug that prevents the "custom shortcuts" keys from working for favourite keys 3, 4 and 5. Instead we have to do this:
- In a terminal, run:
- Navigate to apps/metacity/global_keybindings
- Change "run_command_3" to be 0xc2, "run_command_4" to be 0xc3, and "run_command_5" to be 0xc4 - these corresponds to the 3 / 4 / 5 favourite keys.
- Navigate to apps/metacity/keybinding_commands
- Change "command_3" to be the take-screenshot command:
gnome-screenshot --window --interactive
- Change "command_4" to be the new-text-editor command:
- Change "command_5" to be as desired.
From the command line, run "
software-center" -> Skype -> More Info -> Install.
Then to make the right-click menus legible with Ubuntu's dark theme, do as follows:
- Applications -> Internet -> Skype -> single-click on the skype icon in the top right to open skype -> Ctrl-O to open options -> "general" -> Choose Style: "Desktop settings" -> close.
- Single click on skype icon to open skype again -> Ctrl-Q to close.
- Now restart skype by going Applications -> Internet -> Skype, and the right-click menus will be readable.
Install the Tahoma fonts
Once the msttcorefonts package is installed you will notice that Tahoma and Tahoma Bold is missing. You will need to extract Tahoma and Tahoma Bold from the zip file. Tahoma is used for Microsoft desktop, title bars and menu fonts so if you are trying to get that XP look you will need the Tahoma regular and Tahoma Bold fonts. Install Tahoma by doing the following in a terminal.
cd ~ wget http://www.stchman.com/tools/MS_fonts/tahoma.zip sudo unzip -d /usr/share/fonts/truetype/msttcorefonts ~/tahoma.zip sudo fc-cache -f -v rm -f ~/tahoma.zip
- Install the "flash-aid" extension in Firefox, which fixes up or installs flash for Ubuntu and Debian systems.
- Restart the browser.
- Go to: Tools -> Flash-Aid -> Wizard Mode, go with all the defaults.
- It removes any old flash plugins and downloads and installs the latest Adobe one.
- For AMD64 systems, can use the flash 64 bit beta.
If flash videos have a blue tint after the installation, then repeat the above steps, and it will be fixed.
Install Google Earth
sudo wget http://www.medibuntu.org/sources.list.d/intrepid.list --output-document=/etc/apt/sources.list.d/medibuntu.list sudo aptitude update && sudo aptitude install medibuntu-keyring && sudo aptitude update sudo aptitude install googleearth-4.3
... or follow the manual instructions on this page for a more recent version.
Install Acrobat reader
From the command line, run "
software-center", or go Applications -> Ubuntu Software Center, and then go: -> Canonical Partners -> Adobe Acrobat reader -> Install.
Then to tweak the display preferences of Acrobat Reader: Edit -> Preferences -> Page Display -> set "Zoom" to "Fit Page" -> Click "Ok".
To change the default file handling for PDF's all I had to do was find a PDF, right click, select Properties, click the Open With tab and select Adobe Acrobat Reader from the options.
To install and configure opera (since it's useful for testing web pages to be able to check behaviour, and it's useful to have another browser around sometimes), do the following:
sudo nano /etc/apt/sources.list
... and add these two lines:
# For latest stable opera: deb http://deb.opera.com/opera/ stable non-free
- Then do:
sudo wget -O - http://deb.opera.com/archive.key | sudo apt-key add - sudo aptitude update sudo aptitude install opera
- Then run opera - Applications -> Internet -> Opera
- Right-click on the tab bar, select Customise -> Toolbars tab -> change the "wrapping" setting to "Wrap to multiple lines".
Enable Apport for crash bug reporting
Enable apport so that crash bugs will be reported and logged:
sudo nano /etc/default/apport
change enabled from "0" to "1".
Crashes will then be logged to /var/crash/
Configure Open Office to work in MS Office 2000 compatibility mode
Source of instructions. Only do this if you are testing a migration to Ubuntu. Once you have already switched, then use the native ODF for new files, as they generally save formatting better.
- Start OpenOffice Word Process: Applications -> Office -> OpenOffice.org Word Processor -> tools -> options -> expand "Load/Save" -> select "general" -> For document type = "Text document", set Always save as "Microsoft Word 97/2000/XP" (instead of "ODF text document"); For Document type = "Spreadsheet", set Always save as "Microsoft Excel 97/2000/XP"; For Document type = "Presentation", set Always save as "Microsoft PowerPoint 97/2000/XP" -> then click "OK".
- Then tools -> options -> OpenOffice.org Writer -> compatibility -> tick "Use printer metrics for document formatting", tick "Do not add leading (extra space) between lines of text", and tick "Consider wrapping style when positioning objects". Then go: Use as Default -> Yes -> OK.
Note: When you upgrade between Ubuntu releases, you will probably need to repeat the first step, otherwise it will default back to saving in OpenOffice's formats by default.
Set up Australian dictionaries in Open Office
Source of instructions - these instructions assumed Canadian English, but the same bug applies to Australian English too.
wget http://ftp.services.openoffice.org/pub/OpenOffice.org/contrib/dictionaries/en_AU.zip unzip en_AU.zip sudo mv en_AU.* /usr/share/myspell/dicts cd /usr/share/myspell/dicts/ sudo chown root:root en_AU.* sudo ln -s en_AU.aff en-AU.aff sudo ln -s en_AU.dic en-AU.dic sudo vi /etc/openoffice/dictionary.lst
Add the following line to the end of the file:
DICT en AU en_AU
- Turn off new email notifications: Evolution -> Edit -> Plugins -> Uncheck "Mail Notification" plugin.
- Edit -> Preferences -> 'Calendar and Tasks' -> 'Display' tab -> Disable the 'Compress weekends in month view' option.
- Customize the default mail folder view. Get one folder looking right (personal preference: Columns: From / Subject / Received, with threads off, sorted by date received with most recent first). Then go View -> Current view -> Save Custom View... -> Replace existing view -> Messages -> Save. "Messages" is a special view, which is used by default on all folders, although you can override it on a folder-by-folder basis, but customizing that folder's view.
Set up SSH keys and KeepAlive Interval
For each machine you want to have password-less SSH login to, do:
ssh-copy-id -i ~/.ssh/id_dsa.pub machine1
Also on some connections the SSH shell can close after a short timeout period. To keep connections option for longer, on the client side do,
sudo nano /etc/ssh/ssh_config and then add this line to send a keep-alive heartbeat every 60 seconds:
... there is also a corresponding "ClientAliveInterval 60" setting that can be added to /etc/ssh/sshd_config - although sometimes you only control the client side of the link, and so this is not possible.
Automounting remote file systems using SSHFS
Debug any problems with:
tail --lines=0 -f /var/log/*
right before and right after each upgrade
Remove unneeded cruft, by doing:
sudo apt-get autoremove sudo apt-get clean deborphan
Check first that no important packages are about to be removed, then do:
deborphan | xargs sudo aptitude remove
Fix broken packages:
- fix any broken packages (ctrl-t -> resolver -> examine -> g -> g).
- also clean up cache and obsolete files (ctrl-t -> actions -> "clean package cache" and "clean obsolete files").
Ubuntu 9.04 tweaks
These tweaks are only required for 9.04:
gconftool -s --type bool /apps/update-notifier/auto_launch false
(Source) To remove the 60 second delay on shutdown or logout, do this:
- Right-click on the panel power button icon on top-right of the screen -> Preferences -> Untick "Show confirm dialog for logout, shutdown and restart".
Only in Ubuntu 9.04:
sudo aptitude install firefox-3.5 firefox-3.5-gnome-support
Ubuntu 9.10 tweaks
Tweaks to Ubuntu 9.10 that I had to apply to get stuff working again, or configured how I like it:
1: Remove the 60 second delay on shutdown or logout. (Source).
2: For seeing details of SMART reporting for hard disks:
sudo aptitude install gsmartcontrol
3: system -> preferences -> appearance -> theme -> select "Dust".
4: Alt-F2, run gconf-editor , then toogle the GConf key /apps/eog/ui/disable_trash_confirmation to be ticked, to disable prompting for image deleting though Eye of Gnome (source).
5: Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager.
sudo nano /etc/apt/sources.lst
.. then re-enable dropbox, chrome daily builds, etc, and apply those updates:
sudo aptitude update sudo aptitude upgrade
6: Setting MySQL back to utf8 mode:
sudo nano /etc/mysql/my.cnf
add under the "[mysqld]" section:
- open totem via Applications -> Sound & Video -> Movie Player
- open the preferences window via Edit -> Preferences
- select the Display tab
- click the Reset to Defaults button
8: Problem: Mplayer crashing regularly when changing video output mode, and also giving a "couldn't resolve name for AF_INET6:" error on URL playback. Workaround: ditch mplayer, as totem and VLC are suitable replacements:
sudo aptitude remove --purge mplayer
Ubuntu 10.04 tweaks
- system -> preferences -> appearance -> theme -> select "Ambiance".
- If images don't display in office documents: Start OpenOffice writer, and then go: Tools -> Options -> OpenOffice.org Writer -> View -> tick "Graphics and objects" -> click "Ok".
Ubuntu 10.10 tweaks
sudo aptitude remove tracker
Ubuntu 11.04 tweaks
sudo aptitude install unity-2d
Ubuntu 11.10 tweaks
The 11.10 release had more problems than most releases.
Nautilus default view: go to Places -> Home folder -> Edit -> Preferences -> "View new folders using": select "List View".
Restore classic Gnome desktop
To get gnome classic desktop back, as per this blog post.
sudo apt-get install gnome-session-fallback
- Install weather applet
- System monitor applet
- Add application icons for Firefox, chrome, terminal, and gedit.
sudo aptitude install alarm-clock-applet
- Add an application icon for the alarm clock applet.
- Put a trash applet back on the bottom right of the screen.
- Put a show desktop applet back on the bottom left of the screen.
Follow these installation instructions. Then do
sudo aptitude install putty
To add to startup apps: application -> other -> startup applications -> add SSHplus by full path.
blurry image viewer
Images look blurry because the default Gnome Image viewer (eog/eye of gnome) is set to "Best Fit" instead of "Normal view", which resizes images slightly, making them appear blurry. Unfortunately, there seems to be no preference or setting that allows changing this permanently. Instead just install another image viewing app, and make it the default:
sudo aptitude install gthumb
It can be customized to view images 1:1 by going Edit -> Preferences -> Viewer -> Set to actual size. Then go View -> unselect "Thumbnail pane" (with this on, it seems to interfere with 1:1 viewing). Test it, then if so make it the default app by going ubuntu "System Settings" (top right corner of your desktop) -> System info -> Default applications -> Photos -> gThumb.
usb automounting was broken
Inserted USB drives would no longer automatically mount and open a file manager window. Solved by installing, and then removing, the usbmount package.
After upgrading from 11.04 to 11.10, flash applets either did not work, or worked partial (such as the sound being distorted, like the person was underwater). Fixed by installing the "flash-aid" extension in Firefox, which fixes up broken flash for Ubuntu and Debian systems. Installed the extension, restarted the browser, then went Tools -> Flash-Aid -> Wizard Mode, just went with all the defaults, it removed the old flash plugins (I had 2) and downloaded and installed the latest adobe one, and then it was as good as new and working flawlessly.
Install Chromium dev builds
Firefox is currently slightly better as a daily browser, but Chromium is improving rapidly. If you want to play with the native alpha port of Google's Chrome browser just to see how it's going, you can install the dev builds of Chromium quite easily by doing:
sudo add-apt-repository ppa:chromium-daily/dev sudo aptitude update sudo aptitude install chromium-browser chromium-codecs-ffmpeg-nonfree chromium-codecs-ffmpeg-extra
Chrome Extensions to install:
Still waiting for these Chrome extensions as at July 2010:
- The equivalent of Tab Mix Plus. (still looking for this).
Things that aren't working quite right yet in Chromium on Linux:
- The backspace key should go back, or should be configurable for this. There is an extension that allows this, but it should probably be a preference in the base browser.
- Auto-updating of extensions. There is a way to do this from the extensions UI, but in Chromium it doesn't seem to do anything.
- Audio playback not working correctly - e.g. on this slide, get no audio after selecting a national anthem other than US (US works, other's don't). Possibly this issue or this issue.
- WebGL does not work on an old laptop, but does on a modern desktop. Could be that the laptop's hardware is just too old (or just not supported in 3D).
To enable most of the new features of Chromium, change the command line for starting chromium to be like this:
chromium-browser --enable-plugins --enable-greasemonkey --enable-user-scripts --enable-internal-flash --enable-extensions --enable-webgl %U
- To make streetview work: Try to open streetview -> nothing happens -> press Ctrl-Shift-F (which permanently unblock flashblock on that site) -> then streetview will pop up and work thereafter.
Updating the flash plugin if you get a warning that "the flash plugin was blocked because it is out of date", or just installing the flash plugin.
- First check where the plugin is installed, by opening chrome://plugins/ in chromium, and expanding the "details" link.
- For me, it said "Location: /usr/lib/mozilla/plugins/libflashplayer.so".
- Note this directory, and update the flashplugin variable below if you have a different path:
cd ~/tmp flashplugin=/usr/lib/mozilla/plugins/libflashplayer.so sudo mv $flashplugin ./libflashplayer.so.old wget http://download.macromedia.com/pub/labs/flashplayer10/flashplayer10_2_p3_64bit_linux_111710.tar.gz tar zfvx flashplayer10_2_p3_64bit_linux_111710.tar.gz sudo cp ./libflashplayer.so $flashplugin cd /usr/lib/chromium-browser/plugins sudo ln -s $flashplugin
Now restart chromium and the warning should be fixed & flash should work.
Python-iview (for Australia only)
Python-iview allows downloading ABC shows for later viewing. Steps to install:
sudo add-apt-repository ppa:jeremy-visser/python-iview sudo aptitude update sudo aptitude upgrade # this installs a later rtmpdump sudo aptitude install python-iview
From the VirtualBox Installation instructions:
sudo nano /etc/apt/sources.list
add this line:
deb http://download.virtualbox.org/virtualbox/debian maverick contrib
wget -q http://download.virtualbox.org/virtualbox/debian/oracle_vbox.asc -O- | sudo apt-key add - sudo aptitude update sudo aptitude install dkms sudo aptitude install virtualbox-4.1
The first time that you install, make sure that you are a member of vboxusers group (needed for USB disks to work correctly) :
sudo usermod -a -G vboxusers `whoami` sudo usermod -a -G disk `whoami`
Then reboot the computer.
To get the extension pack, which enables some extra features in VirtualBox 4.1:
cd ~/.Virtualbox mkdir extensions cd extensions/ wget http://download.virtualbox.org/virtualbox/4.1.8/Oracle_VM_VirtualBox_Extension_Pack-4.1.8-75467.vbox-extpack
To enable the extension pack:
- VirtualBox main window -> File -> Preferences -> Extensions -> add button on right -> select the file saved above -> enter password if prompted.
Before starting the Guest machine, make sure USB functionality is enabled by going:
- Settings -> USB -> Make sure both the USB checkboxes are ticked -> Click the "Add Empty Filter" button (the top button on the right) -> click OK to close dialog box.
Rebuild the virtualbox modules after upgrading from a previous version:
sudo service vboxdrv setup
After upgrading from a previous version, to update the guest's VirtualBox drivers, do this after the Guest has started:
- VirtualBox -> start Guest -> "Devices" menu -> Install Guest Additions.
Then plug in a USB device after the guest machine has started. Then make it visible to the Guest by going:
- Devices -> USB devices -> and select the USB device to make visible.
And in a Debian or Ubuntu guest machine after doing a dist-upgrade, to install the vbox additions, do this:
- Devices -> install guest additions...
mount /dev/cdrom aptitude install build-essential linux-headers-$(uname -r) sh /cdrom/VBoxLinuxAdditions.run
When doing a major version upgrade, use apt-get and not aptitude. For example:
sudo apt-get install virtualbox-4.1
... and then start VirtualBox, and then install the latest extension pack, using the steps above. The link will be on the VirtualBox downloads page.
Newsgroup bin client
sudo aptitude install sabnzbdplus
Then configure as per the steps on their wiki.
Steps for making the Benq Acer S2W 3300U work
- Plug in power and USB cable to the scanner, and connect it to your computer.
- Check SANE is installed, then run
sane-find-scanner, and it should list your scanner.
- From Benq's page get the Mirascan ZIP file. Note that Benq's webservers are crap, and they cut out mid-download, so save yourself frustration by using wget to take care of the downloading/resuming/retrying, by doing:
- Check the ZIP file downloaded okay by doing:
unzip -t mirascanv403u10_bqa.zip
... and making sure it says there were "no errors detected" at the end.
- Extract just the u176v046.bin file (which is firmware blob that this scanner needs to operate) into the current directory:
unzip -j mirascanv403u10_bqa.zip "MiraScan v4.03u10_BQA/BIN/u176v046.bin"
- Set up Sane to use this firmware blob:
sudo mkdir /usr/share/sane/snapscan sudo cp u176v046.bin /usr/share/sane/snapscan/ sudo gedit /etc/sane.d/snapscan.conf
... and change the first line from:
... then save and close the file.
- Then under the Applications -> Graphics menu, run Xsane, or (my preference) Simple Scan.
Unfortunately dropbox does not seem to automatically install updates for old versions. Given this, need to manually install updates on old versions, and easiest way to install dropbox updates on Linux is, open a terminal and do:
dropbox stop dropbox status # Should report "not running" rm -r ~/.dropbox-dist/ dropbox start -i
Handbrake is a media converter, and is especially useful for converting files for portable devices, like Android tablets or iPhones. To install the snapshot releases (which seems to be the easiest way, if you want the GUI) :
sudo add-apt-repository ppa:stebbins/handbrake-snapshots sudo apt-get update sudo apt-get install handbrake-gtk handbrake-cli